Welding machine

WIZDOM welding machine is used for HDPE pipeline system.

There are 8 models of welder.
Model 160 for working range : 63, 75, 90, 110, 125, 140, 160mm
Model 250 for working range : 110, 125, 140, 160, 180, 200, 225,250mm
Model 315 for working range : 160, 180, 200, 225, 250, 280, 315mm
Model 450 for working range : 280, 315, 355, 400, 450mm
Model 630 for working range : 400, 450, 500, 560, 630mm
Model 800 for working range : 500, 560, 630, 710, 800mm
Model 1000 for working range : 630, 710, 800, 900, 1000mm
Model 1200 for working range : 800, 900, 1000, 1200mm

Features:
1. Save modifying cost because it is ready to connect to Data Logger because there are digital temperature control system and oil pressure control system by hydraulic oil pump.
2. Easy to weld according to DVS standard and other standard.
3. Save electricity cost, reduce oil temperature and extend the life of pump because of hydraulic pump on-off valve system
4. Easy to control the Soaking Time and Cooling Time with Timer inside.
5. Display the temperature quickly and accurately by Temperature control unit (PT100).
6. Valve and all equipments are all brand new.
7. Good Design and durable
8. Warranty for 1 year

http://bit.ly/1eGHzZW

Data logger

It is for controlling the parameter of welding machine.

Specification
Dimension : W220 x L285 x H180 mm
Weight : 5.1 kgs
Power Voltage : 90 – 264 Volts
Frequency : 50 Hz
Power Consumption : 40 Watt
Recording Capacity : 1,000 butt-fusion joint records
Communication Ports : RS232 Serial Port 25 Pin
Raw Material Option Setting : PE63, PE80, PE100
Pipe range : 50 – 1,600mm
Error protection system : 6 Levels
Features
- WIZDOM DATA LOGGER is HDPE pipe and fitting welding controlling unit for butt fusion welding, control condition conform to DVS 2207 which is accurate.
- LCD screen can be seen clearly.
- Alarm system to alert each stepping control.
- Recording capacity up to 1,000 welding joints, record more detail such as project detail, site location, pipe supplies, welder, etc.
- The test result can be printed out both during welding process and after welding process. User can print the project detail, the used welding machine detail, can compare actual welding result with standard, and can choose to print all records or print each welding joint record.
- Useable with power generator from 90 - 264 Voltage.
- Useable with all kinds and models of welding machine, easy to apply to any type of welding machine.
- Easy for setting according to HDPE pipe standard such as ISO4427, TIS982-2548, DIN, SFS, etc.
- Suitable size, light weight, portable, fit in an endurable aluminum case.
- Warranty for 1 year

http://bit.ly/18pgxQF



Data Logger

HDPE sheets

It is a very low permeability synthetic membrane liner to control fluid (or gas) migration in a human-made project, structure, or system.

Properties of HDPE sheets
- Chemical Resistance
- UV Radiation Resistance
- Superior Impermeability
- High Tensile Strength
- High Peel and Shear Resistance
- High Tear Strength and Strong Puncture Resistance
- Long Term Durability

General use
It is used for Landfill Liners, Landfill Caps/Covers, Mining, Waste Water Treatment, Aquaculture Ponds, Canals, Reservoir Liners, Tunnel Liners, Concrete Liners, Tank Liners

Specific use
It is used for Hazardous Waste Management

http://bit.ly/19E9djc

Liners

HDPE Stub Flange

HDPE flange adaptor is butt welded fitting at the end of poly pipe is used to connect poly pipe or to connect another kind of pipe. Stub End HDPE is produced conforming to DIN16963 with thickness based on ISO4427, EN12201, AS4130/4131, etc.

http://bit.ly/18p1xEa

Flanges

HDPE Reducing Tee

Tee reducer is a butt welded fitting for branch connections in case the branching pipe is smaller than the main pipe. The thickness is based on pipe standard such as ISO4427, EN12201, AS4130/4131, etc.

In Design, the allowable working pressure of butt-welded fitting is 0.65 times of the allowable working pressure of pipe (DIN16963).

http://bit.ly/1bFvNxM

Tee Reducer

HDPE Equal Tee

HDPE tee is butt welded fitting. Poly tee is produced conforming to DIN16963 with thickness based on ISO4427, EN12201, AS4130/4131, etc.

In Design, the allowable working pressure of butt-welded fitting is 0.65 times of the allowable working pressure of pipe (DIN16963).

http://bit.ly/1bFvqDq

Poly Tee

HDPE Concentric reducer

Pipe reducer is a butt weld fitting for poly pipe.
The thickness is based on pipe standard such as ISO4427, EN12201, AS4130/4131, etc.

http://bit.ly/15Tu6cB

Pipe Reducer